Search results

Corrosion inhibitors for copper immersed in emulsion were investigated by experiments and theoretical calculations, and this study aims to propose a new inhibition mechanism of the inhibitors having protective effects for copper corrosion.

Adsorption behavior of penta-heterocycles (thiophene, 1,2,5-oxadiazole, furan, 2 H-1,2,3-triazole, pyrrole and 1,2,5-thiadiazole) as corrosion inhibitors for copper immersed in oil-in-water (O/W) emulsions was investigated by weight loss, electrochemical tests, morphological characterization and theoretical calculations.

The orders of inhibition effect are furan < pyrrole < thiophene < 1,2,5-oxadiazole < 2H-1,2,3-triazole < 1,2,5-thiadiazole, and 1,2,5-thiadiazole at 0.5 mM has the best inhibition effect for copper immersed in emulsion. The results of scanning probe microscope, scanning electron microscope and electrochemical test show that a protective barrier can be formed on the surface of copper substrate with six corrosion inhibitors, thus effectively inhibiting the corrosion of copper mainly through chemisorption and following Langmuir’s adsorption isotherm.

Quantum chemical and molecular dynamic simulations demonstrate that all these compounds attached to Cu matrix with a flat-adsorption mode to prevent the emulsion corrode copper. Adsorbed inhibitors act as a barrier at Cu matrix to block corrosion and improve hydrophobicity.

This study aims to address the gap in hospitality and tourism (H&T) research concerning green creativity (GC) and seeks to identify the ways in which the interaction between spiritual incentives (SI) and material incentives (MI) affects the relationships among green intrinsic motivation (GIM), green extrinsic motivation (GEM) and GC.

In accordance with the preferred reporting items for systematic reviews and meta-analyses (PRISMA) guidelines, this paper examines studies related to GC in the H&T industry and analyses them using content analysis and critical analysis.

By integrating self-determination theory and the componential theory of creativity, this study enhances the understanding of the interactive moderating role played by SI and MI in the relationship between green motivation and GC. When the level of SI is high and the level of MI is low, GIM has the strongest positive impact on GC. When the levels of MI and SI are both high, GEM has the strongest positive effect on GC.

In practical terms, “high SI-low MI” is the optimal combination for achieving high GC and promoting sustainable long-term green-oriented incentives.

To the best of the authors’ knowledge, this paper represents the first investigation of the interactive moderating effects of SI and MI on the relationships among GIM, GEM and GC, thus enriching the research on the factors influencing green motivation and GC. In addition, this paper proposes a better decision-making basis for organizations facing a green-oriented incentive situation, according to which “high SI-low MI” can facilitate the achievement of high GC at a low cost.

The purpose of this paper is to explore the determinants of entrepreneurs’ subjective social status perception (SSP) on firm international behaviors based on the upper echelons theory and social class theory.

To test the hypotheses, the authors studied a large sample of 10,823 small- and medium-sized private Chinese enterprises from 2006 to 2014.

The results showed that entrepreneurs with higher status perception prefer international activity and firms have higher export intensity and intention. In addition, the social capital of entrepreneurs and institutional environment amplifies the positive relationship between SSP and international behavior.

This paper contributes to research on the upper echelon of management and extends our understanding of how managerial social characteristics influence international strategic decision-making. Besides, it also contributes to the emerging stream of social status research in international expansion studies and expand researchers’ limited understanding of the effects of social status in business settings.

This paper examines the relationship between traditional timber frame structure and the diasporic identity of the Southern Fujianese Chinese community in West Malaysia. It analyses the cultural semiotics of Southern Fujianese traditional Chinese temple timber frame structure architectural language. This study addresses the under-examined domain of Chinese cultural identity representation through the architecture of traditional Chinese temples in Malaysia. It seeks to understand its underlying structure and process involved in revealing its disposition within the cultural phenomena from the perspective of Chinese cultural semiotics.

Selected Southern Fujianese traditional Chinese temples in West Malaysia built between the 18th to the 19th century that retain the traditional timber frame structure were investigated through field survey and focused publication review. Historical interpretive analysis and typological analysis supplement the cultural semiotics analysis to assess the timber frame structure attributes concerning architectural language expressions.

Findings reveal that the architectural language signifiers of the structural disposition of the timber framework and its corresponding formal articulation establish a clear statement of the Southern Fujian Chinese cultural identity.

The evaluation of the cultural identity signifiers helps to understand the underlying structure and process of the Chinese cultural semiotics in architecture. Results of this research substantiate the significance of timber frame structure in preserving the architectural heritage of the Southern Fujianese traditional Chinese temples. They provide important references for conservation and cultural studies of such building typology.

This study aims to analyze the differences of electrocardiograph (ECG) characteristics for female drivers in calm and anxious states during driving.

The authors used various materials (e.g. visual materials, auditory materials and olfactory materials) to induce drivers’ mood states (calm and anxious), and then conducted the real driving experiments and driving simulations to collect driver’s ECG signal dynamic data. Physiological changes in ECG during the stimulus process were recorded using PSYLAB software. The paired T-test analysis was conducted to determine if there is a significant difference in driver’s ECG characteristics between calm and anxious states during driving.

The results show significant differences in the characteristic parameters of female driver’s ECG signals, including (average heart rate), (atrioventricular interval), (percentage of NN intervals > 50ms), (R wave average peak), (Root mean square of successive), (Q wave average peak) and ( S wave average peak), in time domain, frequency domain and waveform in emotional states of calmness and anxiety.

Findings of this work show that ECG can be used to identify driver’s anxious and calm states during driving. It can be used for the development of personalized driver assistance system and driver warning system.

Only a few attempts have been made on the influence of human emotions on physiological signals in the transportation field. Hence, there is a need for transport scholars to begin to identify driver’s ECG characteristics under different emotional states. This study will analyze the differences of ECG characteristics for female drivers in calm and anxious states during driving to provide a theoretical basis for developing the intelligent and connected vehicles.

The purpose of this paper is to solve the problem that the relationship between loading forces, which were applied at different positions on a plane, and output values of load-sharing dynamometer is non-linear.

First, the analytical model of ISPM (isodynamic surface proportional mapping method) method, which is used to calibrate dynamometer, was established. Then, a series of axial force calibration tests were performed on a load-sharing dynamometer at different loading positions. Finally, according to output values, calibration forces at different loading positions were calculated by ISPM method, and corresponding distribution histogram of calibration force error was generated.

The largest error between calculated force and standard force is 2.92 per cent, and the probability of calculated force error within 1 per cent is 91.03 per cent, which verify that the ISPM method is reliable for non-linear calibration of dynamometers.

The proposed ISPM method can achieve non-linear calibration between measured force and output signal of load-sharing dynamometer at different positions. In addition, ISPM method can also solve some complex non-linear problems, such as prediction of plane cutting force under the influence of multiple parameters, the force measurement of multi-degree-of-freedom platform and so on.

The purpose of this study is to realize the multi-objective optimization for MRR and surface roughness in micro-milling of Inconel 718.

Taguchi method has been applied to conduct experiments, and the cutting parameters are spindle speed, feed per tooth and depth of cut. The first-order models used to predict surface roughness and MRR for micro-milling of Inconel 718 have been developed by regression analysis. Genetic algorithm has been utilized to implement multi-objective optimization between surface roughness and MRR for micro-milling of Inconel 718.

This paper implemented the multi-objective optimization between surface roughness and MRR for micro-milling of Inconel 718. And some conclusions can be summarized. Depth of cut is the major cutting parameter influencing surface roughness. Feed per tooth is the major cutting parameter influencing MRR. A number of cutting parameters have been obtained along with the set of pareto optimal solu-tions of MRR and surface roughness in micro-milling of Inconel 718.

There are a lot of cutting parameters affecting surface roughness and MRR in micro-milling, such as tool diameter, depth of cut, feed per tooth, spindle speed and workpiece material, etc. However, to the best our knowledge, there are no published literatures about the multi-objective optimization of surface roughness and MRR in micro-milling of Inconel 718.

This paper is devoted to the generalized Kadomtsev–Petviashvili I equation. This study aims to propose a new approach for investigation for the existence of at least one global classical solution and the existence of at least two nonnegative global classical solutions. The main arguments in this paper are based on some recent theoretical results.

This paper is devoted to the generalized Kadomtsev–Petviashvili I equation. This study aims to propose a new approach for investigation for the existence of at least one global classical solution and the existence of at least two nonnegative global classical solutions. The main arguments in this paper are based on some recent theoretical results.

This paper is devoted to the generalized Kadomtsev–Petviashvili I equation. This study aims to propose a new approach for investigation for the existence of at least one global classical solution and the existence of at least two nonnegative global classical solutions. The main arguments in this paper are based on some recent theoretical results.

This article is devoted to the generalized Kadomtsev–Petviashvili I equation. This study aims to propose a new approach for investigation for the existence of at least one global classical solution and the existence of at least two nonnegative global classical solutions. The main arguments in this paper are based on some recent theoretical results.

Unlike the building forms, technology, and materials of today, the traditional Korean architecture represents an example of flexible building forms in history. Investigating and studying this type of architecture not only can contribute to the reform of architectural history by understanding how ordinary buildings change over time and how they interact with people but also may suggest the possibility of, and methodology for developing long-lasting and sustainable mass housing in Korea and in Asian cities. The first part of the paper demonstrates the structural, spatial, and functional flexibilities of traditional Korean architecture. The second part investigates the construction system, including the organization of builders and the regulations governing the relationship with the residents. Its systematic construction approach is associated with the specialization of construction and standardization and prefabrication of elements, facilitating the easy replacement and reuse of building materials. The paper is based on a research methodology of integrating historical archives and case studies. The main argument posited here is that knowledge and skill of traditional construction of flexibility suggest conceptual strategies to improve current housing design and construction in order to obtain a sustainable future.

Habraken points out that the architectural studio failed to bring students to basic questions in the architecture of everyday environments. Till criticizes that in a studio, it is only the professional value represented by the teachers that prevails. To investigate the reasons of the allegation, this paper introduces a learning model defined by David A. Kolb, in which a learning process consists of two dimensional movements: i.e., prehension (concrete experiences vs. abstract conceptualization) and transformation (reflection and experiment). The paper then inquires into Schön's observation in the studio learning mode characterized as reflection-in-action. It is found that this studio is mainly dealing with the transformation dimension, and prehension dimension is either suppressed or represented by the teacher's experiences and conceptions. The paper discovers that the cause of problems raised by Habraken and Till is the inherent lack of substance in the prehension dimension.

The paper assesses a studio programme in which the basic questions of built environment were systematically introduced. It analyzes the students' reactions and performance in line with students' learning styles found using Kolb's Learning Style Inventory (LSI). It suggests that the students' learning activities are more diversified than what Schön could perceive. There is a possibility to adapt students' personal experience and abstract conceptualization which may play into the studio. By enhancing diversity of learning styles rather than letting one's learning style (reflection-in-action) prevail, the studio may become a platform in which students may learn from each other.